Environmental temperature humidity testing chamber can simulate different environment condition. It's appropriate for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define performance of material.
Design Standard: GB/T2423/5170/10586, JIS C60068, ASTM D4714, CNS3625/12565/12566
Uses:
This equipment can simulate different environment condition. It's appropriate for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define performance of material.
Character:
1. Use the high precision microcomputer touch temperature and humidity controller with high stability of platinum resistance to temperature and wind speed in the circulatory system of temperature and humidity test.
2. control temperature&humidity well-distributed, precisely and steady.
3. Completely independent system separate for testing in high temperature, low temperature and constant temperature&humidity environment.
Features
1. Outside SECC steel, fine powder coating treatment; Inner SUS#304 stainless steel;
2. Use new high temperature resistant long shaft motor;
3 Turbine fan;
4. Silicone forced tight;
5. Overtemperature protection, super load automatic power system;
6. Circulation system: air force level cycle;
7. Heating system:PID+S.S.R;
8. The thermostat: PID microcomputer control, automatic constant temperature, temperature quickly compensation function;
9. Timer: temperature to time, when the power failure alarm indication;
10. According to customer demand matching glass window can be customized according to customer specifications specified.
Application
This machine is designed specially for drying of material which is thermo-sensitive or decompounded and oxidative easily. It can be filled with inert gases, which is especially for a rapid drying of some compound material.
| Model | BT-280 | BT-2150 | BT-2225 | BT-2408 | BT-2800 |
| Inner Size W×H×D(cm) | 40×50×40 | 50×60×50 | 50×75×80 | 60×85×80 | 100×100×80 |
| Outside Size W×H×D(cm) | 93×155×95 | 100×148×106 | 117×166×91 | 140×176×101 | 170×186×111 |
| Volume (V) | 80 L | 150L | 225L | 408L | 800L |
| Temp and Hum Range | A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98% |
| Function | Fluctuation | ±0.5°C ±2.5%RH |
| Deviation | ±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH) |
| Controller Analytical Accuracy | ±0.3°C ±2.5%RH |
| Material | Inner Wall | #SUS 304 Stainless steel |
| Outer Skin | #SUS 304 Stainless steel |
| Heat Preservation | High temperature resistant, high chlorine acid b vinegar foam insulation materials |
| Wind Cycling Way | Centrifugal fan-broadband type forced air circulation |
| Refrigeration Way | Single stage compression refrigeration |
| Refrigerator | French Tecumseh |
| Refrigerants | R4O4A USA DuPont environmental protection refrigerant(R23+R404) |
| Condensing Way | Air-cooled or water-cooled |
| Heater | Nickel chrome heating wire heater |
| Humidifier | Semi-closed steam and wet |
| Water Supplying Way | Automatic cycling water supply |
| Standard Accessories | 1 Observe window(double-deck cavity toughened glass), 1 50mm test hole in the left, 1 PL inner chamber lamp, 2 clapboards, 1 bag of wet and dry bulb, 3 fuses, 1 power line. |
